High Efficiency Horizontal Fluidized Bed Dryer With Cyclone Dust Collector System
XF Series Horizontal Fluidized Bed Dryer
Product Overview
The XF series horizontal fluidized bed dryer, also known as fluidized bed dryer, consists of air filter, heater, horizontal fluidized bed mainframe, cyclone separator, bag filter dust collector and high-pressure induced draft fan. Matching dust removal equipment can be configured flexibly according to material characteristics. Cyclone separator can be used alone for materials with large specific gravity such as instant granules; combined cyclone separator and bag filter dust collector with pneumatic feeding and belt conveyor feeding system are equipped for fine powder and small granular materials with low specific gravity.
Granular solid raw materials are fed into the dryer by feeder. Clean hot air after filtration and heating enters the bottom of fluidized bed, contacts with materials through distribution plate to form fluidization state and complete heat & mass transfer. Dry finished materials are discharged from the discharge port. Exhaust gas discharged from the top of the dryer is recycled for powder materials via cyclone separator and bag filter, then exhausted to atmosphere.
Steam, electric and hot air stove heating modes are optional per customer requirements. It realizes fully automatic continuous drying, suitable for powder and granular materials such as pharmaceutical APIs, tablet particles, Chinese herbal granules, plastic resins and citric acid. Also widely adopted for food additives, grain products, corn germ and feed materials. The applicable particle size ranges 0.5–3mm optimally, with a maximum acceptable particle diameter of 6mm.
Product Features & Advantages
-
Continuous automatic production line, stable uninterrupted drying operation
-
Fast drying speed and low drying temperature, effectively protect material product quality
-
Fully comply with GMP production standards for pharmaceutical manufacturing industry
-
Multiple heating options available: steam heating, electric heating, hot blast stove heating
-
Flexible dust recovery collocation: single cyclone separator, cyclone + bag filter composite dust removal system
-
Two model structures (Model A / Model B) to match different production line layout requirements
-
Complete supporting configuration options: trough mixer, swing granulator, belt conveyor, vibrating screen for integrated production line
-
Suitable for pharmaceutical, chemical, food, grain and feed materials with particle sizes between 0.5 and 6 mm.
-
Stable fluidization state, uniform moisture removal, consistent finished product quality
-
Customizable non-standard large-size fluidized bed equipment for large-capacity production demands
Technical Parameters
| Technical parameters |
XF 0.25-1 |
XF 0.25-2 |
XF 0.25-3 |
XF 0.25-6 |
XF 0.3-2 |
XF 0.3-4 |
XF 0.3-6 |
XF 0.3-8 |
XF 0.3-10 |
| Bed area(m²) |
0.25 |
0.5 |
1.0 |
1.5 |
0.6 |
1.2 |
1.8 |
2.4 |
3.0 |
| Drying capacity(kgH₂O/h) |
10~15 |
20~25 |
30~45 |
52~75 |
15~30 |
42~60 |
63~90 |
84~120 |
105~150 |
| Fan power(kW) |
5.5 |
7.5 |
15 |
22 |
7.5 |
18.5 |
30 |
37 |
48 |
| Intake air temperature(℃) |
120~140 |
| Material temperature(℃) |
40~60 |
|
External dimensions(Main unit)
LxW×H((m)
|
1x0.6x3.35 |
2x0.6x3.35 |
4x0.6x3.35 |
6x0.6x3.35 |
2×0.7x3.4 |
4×0.7x3.4 |
6×0.7x3.4 |
8×0.7x3.4 |
10×0.7x3.4 |
| Land area(m²) |
18 |
25 |
35 |
40 |
25 |
38 |
45 |
56 |
70 |
| Technical parameters |
XF 0.4-4 |
XF 0.4-6 |
XF 0.4-8 |
XF 0.4-10 |
XF 0.4-12 |
XF0.5-4 |
XF0.5-6 |
XF0.5-8 |
XF0.5-10 |
| Bed area(m²) |
1.6 |
2.4 |
3.2 |
4.0 |
4.8 |
2.0 |
3.0 |
4.0 |
5.0 |
| Drying capacity(kgH₂O/h) |
56~80 |
84~120 |
112~160 |
140~200 |
168~240 |
70~100 |
105~150 |
140~200 |
175~250 |
| Fan power(kW) |
30 |
37 |
48 |
70 |
70 |
30 |
48 |
70 |
105 |
| Intake air temperature(℃) |
120~140 |
| Material temperature(℃) |
40~60 |
|
External dimensions(Main unit)
LxW×H((m)
|
4x1x3.58 |
6x1x3.58 |
8x1x3.58 |
10x1x3.58 |
12x1x3.58 |
4x1.2x4.1 |
6x1.2x4.1 |
8x1.2x4.1 |
10x1.2x4.1 |
| Land area(m²) |
18 |
56 |
74 |
82 |
96 |
50 |
70 |
82 |
100 |
| Technical parameters |
XF0.5-12 |
XF0.5-14 |
XF0.5-16 |
XF0.5-18 |
| Bed area(m²) |
6.0 |
7.0 |
8.0 |
9.0 |
| Drying capacity(kgH₂O/h) |
210~300 |
245~350 |
280~400 |
315~450 |
| Fan power(kW) |
140 |
147 |
169 |
197 |
| Intake air temperature(℃) |
120~140 |
| Material temperature(℃) |
40~60 |
|
External dimensions(Main unit)
LxW×H((m)
|
12x1.2x4.1 |
14x1.2x4.1 |
16x1.2x4.1 |
18x1.2x4.1 |
| Land area(m²) |
140 |
180 |
225 |
268 |
Note: These parameters are for reference only and may change according to URS.
Company Profile
Different kinds of products are available in our company. We're pleased to receive your inquiry and will reply as soon as possible. We adhere to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for management and "zero defect, zero complaints" as our quality objective.
|
|
High Efficiency Horizontal Fluidized Bed Dryer With Cyclone Dust Collector System Images
|
